85
electroluxicon.com
Wall-Mount Vent Hoods
Optional
Accessories
Duct-Free Kit
PN # RHDFW60GS
Ducted Option Specifications
•
For outside ventilation.
•
Exhaust Duct Required – 8" round
•
For most efficient airflow exhaust, use a straight run or as
few elbows as possible.
•
Use metallic flex ducting only to connect rigid duct directly
to transitions
(if allowed by code)
.
•
Thermal breaks such as short section of nonmetallic duct,
should be used in areas of extreme cold.
•
Cold weather installations should have additional backdraft
damper installed.
•
Refer to installation instructions on web for detailed exhaust
duct preparation and converting vent blower system for
recirculating inside.
Installation Specifications
•
Product Weight – 60 Lbs.
•
Wall-Mount Installation
•
Ventilation system is preset to exhaust air outside. If
outside ducting is not possible, optional Duct-Free Kit
(PN # RHDFW60GS) is available to convert ventilation
to allow air to recirculate inside.
(Refer to Ducted
Option Specifications for outside ventilation.)
•
Sones Rating – 9.9
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 0.474 kW
(For use on adequately wired 120V, dedicated circuit
having 2-wire service with a separate ground wire.
Appliance must be grounded for safe operation.)
•
Amps @ 120 Volts = 3.8 Amps
•
Always consult local and national electric codes.
Check local building codes for installation requirements,
as they may vary per locale.
•
Minimum installation height allowed from bottom of
hood to cooking surface is 24" - 30" for electric and 30"
for gas.
(NOT more than 36" recommended.)
•
To prepare mounting surface, adequate structure and
support must be provided, capable of supporting 100 lbs.
planning
information
For 30" model:
RH30WC60GS
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
WM Vent Hood
RH30WC60GS
Top
Controls
4
9
/
16
"
Wiring box
Air outlet - 7
7
/
8
" diam.
Dimensions
from base of
hood to ceiling,
and include
clearance
required for
installation.
29
7
/
8
"
19
11
/
16
"
2
9
/
16
"
30
1
/
8
"
min.
54
9
/
16
"
max.
10
13
/
16
"
13
3
/
16
"
29
7
/
16
"
( min.
height
with one
cover)
Summary of Contents for ICON Professional E30DF74GPS
Page 1: ...design guide ...
Page 4: ...4 ...
