16
30" Gas Range
E30GF74HPS
Optional
Accessories
Stainless Steel
Island Trim Kit
(for use in place
of backsplash)
PN # 903132-9010
4" Stainless
Steel Kick Plate
PN # 318352601
Black Knobs Kit
PN # 903108-9010
cooking
Full-Gas Freestanding Ranges
Installation Specifications
•
Product Weight – 259 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 or 20 Amp
•
Connected Load (kW Rating) @ 120 Volts = 0.6 kW
(For use on adequately wired 120V, dedicated circuit
having 2-wire service with a separate ground wire.
Appliance must be grounded for safe operation.)
•
Amps @ 120 Volts = 7 Amps
•
Always consult local and national electric and
gas codes.
•
Range ships with 3/4" factory regulator.
•
LP Gas conversion kit supplied.
•
Overhead cabinetry should not exceed a 13"
maximum depth.
•
Allow 34" minimum clearance between top of rangetop
and bottom of unprotected wood or metal overhead
cabinetry.
•
Absolute minimum horizontal distance between overhead
cabinets installed to either side of appliance must be no
less than maximum width of appliance.
•
Allow 5" minimum clearance from edge of rangetop to
nearest combustible wall on either side of unit.
•
Allow 24" minimum clearance when bottom of wood or
metal overhead cabinet is protected by not less than
1/8" flame-retardant millboard covered with not less than
No. 28 MGS sheet steel, 0.015" stainless steel, 0.024"
aluminum or 0.020" copper.
•
To reduce risk of fire when using overhead cabinetry,
install vent hood that projects horizontally a recommended
minimum of 5" beyond bottom of cabinets.
planning
information
For 30" model:
E30GF74HPS
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
Summary of Contents for ICON Professional E30DF74GPS
Page 1: ...design guide ...
Page 4: ...4 ...