Electrolux EFE914, Installation & User Manual

Page: 9 / 68

9
BEFORE USING YOUR APPLIANCE
Preparing the appliance
1 Please remove all stickers, leaflets and boxes
from the door and from the floor of the oven
before operation.
2 Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the
oven is completely dry.
3 Do not line the oven with foil. It will damage
the enamel.
Setting the time
The time of day must be set before the appliance can
operate.
Touch control electronic clock (EFE914)
• After the appliance has been electrically connected
“12.00” will be displayed and the “clock” indicator
will flash.
• To set the time of day, press – or +. 5 seconds after
the last change, the “clock” indicator will disappear,
confirming the time has been set.
NOTE: The clock has a 24-hour display.
Programmable controller
(EVEP916, EFEP916, EFEP956)
After the appliance has been electrically connected
“Set Clock” will illuminate under the clock display and
the Hour digits will flash.
1 Use the timer + and - to set the hour portion
of the current time (including AM/PM).
2 Press OK when the hours are set correctly.
The Minute digits will flash.
3 Use the timer + and - to set the minutes portion
of the current time.
4 Press OK when the minutes are set correctly.
You can turn off the oven or it will do so after 8
seconds. Once the time has been entered, the
clock advances minute by minute.
IMPORTANT!
• The clock will remember the time for 24 hours
without power.
• The display has 2 levels of brightness.
• Brightest illumination: whenever the oven is in use.
• Medium illumination: whenever the oven is not in use.
IMPORTANT!
New appliances can have a smell during first use.
It is recommended to ‘run in’ the oven before you
cook for the first time. Operate the oven, empty, at
a temperature of 180ºC for approximately 1 hour.
Please ensure the room is well ventilated during
this process.