manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 50

50  electrolux.com.au

Cabinet requirement

Models 

EFE914, EFEP916 & EFEP956

 are designed to 

fit into a 900mm wide gap between standard kitchen 
cabinets. The appliance integrates with the kitchen 
cabinets by matching the height, depth and kick panel. 
The cooker may also be installed at the end of a line of 
benches or with a free space either side. In addition, a 
slot-in type installation is catered for allowing a continuous 
cabinetry kick panel to be used. 

 WARNING!

• 

The cooker must be installed and serviced only by  
an authorised person.

• 

A Certificate of Compliance MUST be supplied to  
be kept by the customer.

• 

The packing materials must be removed before  
you install the cooker.

• 

The surrounding kitchen cabinets must be able 
to withstand 85°C. Electrolux WILL NOT accept 
responsibility for damage caused by installation into 
kitchen cabinets which cannot withstand 85°C.

• 

The pipes used for installation MUST have sufficient 
loops so the cooker can be moved for service (gas 
models).

• 

The vents, openings and air spaces MUST NOT  
be blocked.

• 

Two anti-tilt brackets are supplied and stored in the 
base of the packaging

• 

The anti-tilt brackets and chain or front stops MUST 
be installed to avoid accidental tipping (freestanding 
and slot-in models).

• 

You MUST NOT lift or pull the cooker by the door 
handle.

• 

The cooker MUST be checked every five years.

• 

If the supply cord is damaged, it must be replaced 
by the manufacturer, its service agent or similarly 
qualified persons in order to avoid a hazard.

• 

The appliance must not be installed behind a 
decorative door in order to avoid overheating.

• 

Due to the weight (95-100kg) and size of the cooker,  
2 persons are required to install it.

Gas model clearance requirements

• 

Ensure the appliance is installed in accordance 
with clauses 6.2.5 and 6.10.1.1 of AS/NZS 5601.1 
or clauses 6.9.1 and 6.9.5 of AS/NZS 5601.2 with 
regard to clearances to combustible surfaces and 
materials, and clearances to rangehoods and exhaust 
fans, to ensure clearances of 200mm from burners to 
vertical combustible surfaces observe the minimum 
dimension of 100mm from each side of the cooker to 
combustible surfaces.

• 

Clearances to combustible surfaces may be reduced 
if combustible surfaces are protected in accordance 
with clause 6.10.1.2 of AS/NZS 5601.1, or clause 6.9.2 
of AS/NZS 5601.2.

• 

When setting the cooker height, ensure the top of the 
cooker is at least 10mm higher than the level of the 
benchtop.

Dimensions

Gas hob 910mm

(adjustable 910 - 930mm)

Ceramic hob 906mm

(adjustable 906 - 926mm)

600mm minimum 

vertical clearance from 

combustible surfaces

15mm 

(height of trivet above hob)

60mm

895mm

600mm

INSTALLATION OF EFE914, EFEP916 & EFEP956

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands