manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 26

26  electrolux.com.au

OVEN COOKING FUNCTIONS 

(CONTINUED)

Symbol

Function Description

Left grill

The ‘Left Grill’ directs radiant heat from only one of the powerful upper elements onto the food.  
The ‘Left Grill’ function is used instead of ‘Full Grill’ when only half the amount of grill area is needed. 
Left Grill has 2 temperature settings, ‘LO’ and ‘HI’.

Grill with the oven door closed.

Fan grill

‘Fan Grill’ offers you the benefits of both fan assist bake and traditional grill functions. The grill 
element turns on and off to maintain set temperature while the fan circulates the heated oven air.

Grill with the oven door closed.

You can use ‘Fan Grill’ for large cuts of meat, which gives you a result similar to ‘rotisserie’ cooked 
meat. Put your food on a shelf in the second lowest shelf position. Put the grill dish on the lowest 
shelf position to catch any spills. When using ‘Fan Grill’ it is not necessary to turn the food over 
during the cooking cycle. Set temperature to 180°C.

Keep warm

The ‘Keep Warm’ function is a low temperature oven function designed to keep your food at a 
perfect eating temperature without cooking it further. Heat comes from the smaller elements above 
the food and is circulated by the fan. Use ‘Keep Warm’ to keep your food warm while you prepare 
the rest of the meal or afterwards while you wait for the late arrival.
Note: After cooking, the oven retains enough heat to continue to cook food even if the elements 
are turned off. The ‘Keep Warm’ function recognises this by giving you a warning message. If this 
happens the function will not start.

Defrost

The ‘Defrost’ function uses low temperature air that is circulated by the fan. You can defrost (thaw) 
your food before you cook it. You can also use ‘Defrost’ to raise your yeast dough and to dry fruit, 
vegetables and herbs. The ‘Defrost’ function does not have a suggested temperature but uses the 
ambient heat in the oven cavity.

Pyro

The ‘Pyrolytic Cleaning’ function cleans by burning off the spatters and accumulated dirt and grease 
from the oven liner, at high temperature. This process produces ash which can be wiped out of the 
oven cavity.

Food probe

The Food Probe measures the core temperature of the food. When the food reaches the required set 
core temperature, the oven turns off. The Food Probe has a core temperature range of 50 – 99 ºC.

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands