manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 52

52  electrolux.com.au

INSTALLATION OF EFE914, EFEP916 & EFEP956 

(CONTINUED)

Installation of screw-in feet

Freestanding appliance are supplied with four screw-in  
feet in the internal accessory pack. The screw-in feet  
can be adusted by turning the lower half clockwise or  
anti-clockwise.

 

IMPORTANT! 

• 

To minimise the weight of the oven for easier 
installation, remove the oven door and oven internal 
accessory pack. Refer to page 48 for instructions  
on how to remove the oven door.

• 

If the appliance is a gas hob model, remove the 
burner  cap and burner crown. Store all items safely, 
away from the installation area.

Tilt and carefully lay the appliance on its back to gain 
access to the installation point for the screw in feet.

 CAUTION

• 

To avoid scratching the floor and the appliance it 
self, fold the packaging carton board and place it 
underneath the appliance as protection.

• 

Do not lay the appliance on its sides or its front.

Install the four supplied feet via the four installation points. 
Make sure that each foot is securely fastened.

 CAUTION

• 

Do not over-torque the foot.

Adjust the height of the screw-in feet to make sure the  
hob surface is 10mm above the bench when appliance  
is upright.

Bench 10mm

 minimum

Tilt the appliance upright by lifting the back of the hob and 
pivoting it about the back two feet.

 WARNING

Heavy item! This step must be performed by two 
persons.

x 2

Levelling oven

Place a level in the oven as below making sure the level sits 
on the front and rear forms. Adjust the feet accordingly to 
level the appliance.

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands