manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 58

58  electrolux.com.au

Underbench installation

Your underbench oven looks best when the control panel 
is directly under the benchtop. An upper infill panel may 
be added if the cooktop placed above the benchtop is 
too deep. *Refer to cooktop installation instructions for 
required clearance between cooktop and oven.

Vertical cabinet installation

The oven can be built into a vertical cabinet in the same 
manner as an underbench. The required cavity dimensions 
are the same and the product is secured to the cabinet in 
the same way.

INSTALLATION OF EVEP916

For the best integration within a kitchen, install this 
appliance in a cupboard that gives a flush fit with the 
surrounding cupboard fronts. A recess of 20mm is ideal.

NOTE: Your appliance must be mounted on a horizontal 
surface for the full width and depth of the product.

NOTE: A ventilation slot 20mm wide is required at the  
rear of the base of the cabinet floor.

The cooker MUST be installed in compliance with:
• 

Wiring connections in AS/NZS 3000 Wiring Rules.

• 

Local regulations, municipal building codes and  
other statutory regulations.

NOTE: If a powerpoint is fitted it must be accessible with the 
appliance installed.

900mm

600mm

580mm

*Refer to cooktop installation instructions for required 

clearance between cooktop and oven.

876mm

 Mounting holes

20mm  

slot

100mm  

max

*20mm  

see note  

below

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands