manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 35

35

Activation and deactivation

Touch   for 1 second to activate or deactivate the 
appliance.

NOTE: When using cookware greater than 220mm the 
manufacturer recommends that the centre zone be used.

Automatic switch off

THE APPLIANCE WILL AUTOMATICALLY SWITCH OFF IF:
• 

 All cooking zones are deactivated (   ).

• 

 You do not set the heat setting after you activate the 
appliance.

• 

You spill something or put something on the control 
panel for more than 10 seconds (a pan, a cloth, etc).  
An acoustic signal will sound and the appliance will 
switch off. Remove the object or clean the control panel.

• 

 The appliance becomes too hot (eg. when a 
saucepan boils dry). Before you use the appliance 
again, wait for the cooking zone to cool down.

• 

 You use incorrect cookware. The symbol   will  
come on and the cooking zone will deactivate 
automatically after 2 minutes.

• 

 A cooking zone is on for an extreme length of time. 
The symbol   will show and the appliance will switch 
off. See below.

• 

The length of time that various settings can run  
for before automatic switch off occurs are  
shown below:

• 

 - 6 hours

• 

 - 5 hours

• 

 - 4 hours

• 

 - 1.5 hours

The heat setting

To adjust the heat setting, place your finger over the heat 
bar graphic and slide across. The display will show the 
adjusted heat setting.

NOTE: When you use cookware larger than 180mm the 
manufacturer recommends that you put it on the rear 
cooking zones.

Bridge function

The Bridge function connects two cooking zones together 
and then operates them as one. You can use this function 
for cookware larger than 260mm.
First set the heat setting for one of the cooking zones.
To activate the Bridge function touch  . The indicator will 
then come on. To set or change the heat setting, touch 
either one of the control sensors.
To deactivate the Bridge function touch  . The 
indicator will go off. The cooking zones will then operate 
independently.

Fast heat up function

You can get a required heat setting in a shorter time if 
you activate the Fast Heat Up function. This will run the 
cooking zone at maximum until the required heat setting  
is reached.
To start the Fast Heat Up function for a cooking zone:
1  Touch the power function sensor    (   will come on).
2  Immediately touch your required heat setting.  

After 3 seconds   comes on in the display.

3  The zone will heat at maximum until your required 

heat setting is reached. The display will then change 
from   back to the required heat setting.

4  To stop the Fast Heat Up function change the  

heat setting.

USING THE INDUCTION HOB

 (CONTINUED)

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands