manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 36

36  electrolux.com.au

Power management

Power management divides the power between the  
front and rear zones for each of the 2 outer modules.  
See illustration below: 

This allows either the front or rear zone to draw power  
from the other, if maximum power is required.

The timer

The count down timer

Use the count down timer to set how long you want a 
cooking zone to operate.

 IMPORTANT!

• 

 To select the cooking zone: touch the sensor   again 
and again until the correct zone indicator is displayed.

• 

Immediately, touch the   sensor to set the time (00 - 
99 minutes). When the timer indicator of the cooking 
zone starts to flash more slowly the time will begin to 
count down.

• 

To see the remaining time select the cooking 
zone with the   sensor. The display will show the 
remaining time.

• 

To change the count down timer: select the cooking 
zone with the   sensor and touch   or   .

• 

To deactivate the count down timer select the cooking 
zone with the   sensor and touch   until the time 
counts down to 00. The timer indicator will go out.

 When the timer count down comes to an end, the cooking 
zone will deactivate, the 00 will flash and a beep sound  
will occur for 20 seconds.
The beep sound and flashing can be deactivated 
immediately by touching the   sensor. 

 IMPORTANT!

When the two timer functions operate at the same time, 
the display shows the count up timer first.

The Minute minder

You can use the timer as a minute minder when the 
cooking zones are not in operation. Touch  . Then 
touch   or   of the timer to set the time. When the timer 
countdown comes to an end, 00 will flash and a beep 
sound will occur for 30 seconds. The beep sound and 
flashing can be deactivated immediately by touching the 

 sensor.

The Stop+Go function

Use the   function to close down all of your operating 
cooking zones to the lowest heat setting with just one 
touch. 
• 

To activate this function touch  . The indicator 
will come on and the symbol    will show on all 
operating zones.

• 

 When 

 is activated, you cannot change the heat 

setting.

• 

To deactivate this function touch   again. The heat 
setting that you set before comes back on.

USING THE INDUCTION HOB 

(CONTINUED)

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands