manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 19

19

STEAM ASSISTED BAKING

All Electrolux range of ovens have the ability to add steam 
while baking.
Cooking with steam is a great addition to straight ‘hot 
air’ cooking. Steam brings out all the natural flavours and 
goodness in the food, cooks evenly from surface to centre 
and retains more nutrients and vitamins. Steam assisted 
cooking consistently produces juicy, succulent interiors 
with crisp, golden exteriors.

 WARNING!

Risk of burns and damage to the appliance

• 

Do not open the appliance door when the steam 
function operates, with the exception of preheating.

• 

Open the appliance door with care after the steam 
function stops.

• 

Refer to cleaning the appliance for cleaning after  
the steam function operates.

Function selector model (EFE914)

1  Open the oven door
2  Add 200ml of tap water to the cavity well. Fill the 

cavity well with water only when the oven is cold.

3  Set the ‘Bake + steam’ function.

4  Turn the knob for the temperature to select  

a temperature.

5  Preheat the oven for 10 minutes or according  

to the recipe suggestions.

6  Place food in the appliance and close the  

oven door.

  CAUTION

Do not refill the cavity well with water during 
cooking or when the oven is hot.

7   To deactivate the appliance, turn the knob for  

the oven functions to off position.

8  Remove water from the cavity well.

Programmable controller models  
(EVEP916, EFEP916, EFEP956)’

1   Open the oven door.
2  Fill the cavity well with 200ml of water (only when 

the oven is cold).

3  Set the ‘Fan cooking’ function.

4  Activate the Steam button by touching  . The steam 

control works only with the ‘Fan cooking’ function. 

5  The indicator turns on. 
6  Set the temperature using the   and   

temperature symbols.

7  Preheat the oven for 10 minutes or according  

to the recipe suggestions.

8  Place food in the appliance and close the oven door.

 CAUTION

Do not refill the cavity well with water during 
cooking or when the oven is hot to avoid damage 
to enamel.

 WARNING!

Make sure that the appliance is cool before you 
remove the remaining water from the cavity well.

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands