16 electrolux.com.au
7 Touch the ‘delay end’ symbol to move the end
time forward.
8 Touch ‘OK’ or after 8 seconds from the last time
adjustment the SET icon will light and the oven is
now programmed.
The oven will commence its cooking cycle to finish at the
set ‘end time’.
IMPORTANT!
•
30 seconds after a cooking function has started, it is
no longer possible to delay the start time.
•
In order to delay a cooking function that has already
started, the oven needs to be switched off then
switched on again and re-programmed.
•
Even though the heating element turns off, the oven
will still retain substantial heat. This will continue to
cook food until it is removed or the oven cools down.
If you do not plan on being present when the oven
turns off, you should take this extra heating time
into account.
Timers
The appliance has two timers which can be used one at a
time. The count up timer can be used to measure a period
of time. The count down timer beeps at the end of a
preset time.
USING THE OVEN
(CONTINUED)
IMPORTANT!
•
When you use the ‘cook time’ function, the ‘Finishes
at’ display activates and tells you what time of day
the oven will turn off (based on the set cook time).
•
During cooking, you can adjust the cook time with
the Cook time or symbols.
•
When the cook time has elapsed, an audible signal
will sound for two minutes, the oven will switch off
and COOKING FINISHED will be displayed.
•
To stop the audible signal, press any of the symbols
on the control panel.
•
If you wish to cook a bit longer, press the cook time
symbol for each additional minute you require.
The oven automatically reverts to the function and
temperature previously programmed. This feature
is available for 5 minutes after cooking has finished.
After that, the oven automatically switches off.
Setting the delay end time
The delay end function can be used to switch the oven
on and off at a specific time during the day.
1 Check the clock displays the correct time of day.
2 Select the desired oven function and cooking
temperature.
3 Set the required cook time.
4 Press the ‘delay end’ symbol to move the end time.
5 Touch ‘OK’ or after 8 seconds from the last time
adjustment the SET icon will light and your oven is
now programmed. The oven will start its cooking
cycle to finish at the set ‘end time’.
6 When the oven has finished cooking, cook time
can be extended or the beeper turned off just as
in ‘cook time’ mode.
Summary of Contents for EFE914
Page 1: ...EVEP916 EFEP956 EFEP916 EFE914 Installation User manual 90cm Cooker ...
Page 65: ...65 NOTES ...
Page 66: ...66 electrolux com au NOTES ...
Page 67: ...NOTES ...
