manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 48

48  electrolux.com.au

  WARNING

Slides (telescopic runners)

• 

Do not subject slides to temperatures  
greater than 300°C.

• 

Do not place slides in a dishwasher.

• 

Do not use a knife or sharp objects to  
clean slides.

• 

Do not add oil or any other lubricant to slides.

Positioning the door for dismantling

The door needs to be positioned at an angle to aid in  
the disassembly of the panes.
• 

Open the door fully to gain access to the hinges.

• 

Push down the hinge locking tab on both hinges.

Locking tab up - normal position

Locking tab down - for cleaning

• 

Gently close the door until it stops in the partially  
open position on the locking tab.

NOTE: The door cannot fully close with the locking tab  
in this down position.

Removing the top door trim

• 

Push in the 2 tabs on either side of the trim.

• 

Lift the trim away from the door.

Removing the glass panes

• 

Remove the inner glass and middle glass layers  
from the door.

• 

Clean the glass using detergent and warm water. 
Wipe clean and dry thoroughly.

• 

The outside glass cannot be removed from the  
door and hence can be cleaned in-situ.

CLEANING THE OVEN DOOR

  Inner Glass

Middle Glass x 2

     Outside

_

 

Reassembling the glass panes & and top door trim

• 

Replace the middle glass back to the door first.  
The middle glass is a clear pane and orientation of  
the glass is not important.

• 

Replace the inner glass next ensuring the side that  
is painted is facing away from the oven cavity.

• 

Replace the top door trim ensuring the 2 side tabs 
have clipped into the column.

• 

Pull the hinge locking tabs back up and close the door.

Changing the light globes

• 

Switch the appliance off at the isolation switch before 
attempting to change the light globe.

• 

There are 2 light globes located in the top of the oven 
cavity towards the rear. 

• 

To get access to the globes, firstly drop the element 
down as explained on page 41.

• 

To remove, turn oven light glass anti-clockwise.

• 

A special high temperature resistant borosilicate globe 
should be used. This can be purchased from the 
Customer Care Centre.

Light glass can be removed 
- turn anti-clockwise

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands