manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 10

10  electrolux.com.au

BEFORE USING YOUR APPLIANCE 

(CONTINUED)

Slides (Telescopic runners)

1  The oven is supplied with a set of slides and 

instructions on how to assemble. Ensure the  
rack and slides are of the same hand, eg. left  
hand slide should be fitted on the left hand rack.

2  The instructions also show recommended slide 

positions on the rack.

Installing the slides (telescopic runners)

1  Obtain left hand side rack and left hand slide –  

see image to identify.

L = Left hand side
R = Right hand side

2  The shaded wires indicate the wire the slide can  

be mounted on. Fit slide rear clips to the rear of  
wire at an angle as shown below.

1

2

3  Push slide front clip over wire until secured.

CLICK!

3

Installing the side racks

1  Insert the rear peg into the rear access hole 

provided, ensuring peg is fully inserted.

2  Then locate the front peg into the front access  

hole and push in firmly.

Fitting the shelves and grill dish carrier between 
the side rack wires

The shelves are designed so that they have maximum 
extension but cannot be accidentally pulled right out.  
The grill dish carrier is designed the same way and can  
slot straight into the side racks.
To fit a shelf or grill dish carrier to side racks:
1  Locate the rear edge of the shelf/carrier in between 

guide rails of the side rack - see diagram.

2  Ensure the same rail positions on both sides of the 

oven are being engaged. With the front edge raised, 
begin to slide the shelf into the oven.

3  Once the detents have passed the front edge of 

the side rack, the shelf can be pushed completely 
in. When fully inserted the shelf/carrier should not 
interfere with the closed oven door.

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands