manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 54

54  electrolux.com.au

 WARNING

Appropriate fasteners must be used to suit the type of wall on which the anti-tilt brackets are installed.

4  The anti-tilt brackets must be secured to the rear wall of the cavity  

with appropriate fastener according to dimensions in diagram.

Connect services to the appliance prior to placing  
into cavity.
To locate appliance, slide into cavity ensuring the  
anti-tilt brackets fully engaged with the rear left and  
right engagement slots.
The unit must be pushed against the wall on installation.
Re-install oven door, burner body, burner caps and  
trivets after the appliance is placed in the cavity.
Gas only: Check that the gas hose, if used, has not  
been kinked during installation.

C

L

Anti-tilt bracket
installation
reference line

370

370

725

Install anti-tilt brackets
in this orientation as 
shown.

(Fasteners not supplied)

Installing the clip-on kick panel

Freestanding models are supplied with a clip-on kick panel 
that can be assembled to clip onto the front feet for a more 
integrated and seamless kitchen appearance.

Clip base

Clip snap

INSTALLATION OF EFE914, EFEP916 & EFEP956

 (CONTINUED)

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands