manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 45

45

Oven

• 

Always keep your appliance clean. Ensure that fats 
and oils do not accumulate around elements or fans.

• 

Always keep the oven dish, baking trays, grill dish  
and grill dish inserts clean, as any fat deposits may 
catch fire.

• 

Always wrap your meats in foil or an oven roasting  

bag to minimise cleaning. Any polyunsaturated fats 

can leave a varnish-like residue which is very difficult  
to remove.

Grill

•    Always keep the grill dish and grill dish insert clean,  

as any fat deposits may catch fire.

Removing the shelves and grill dishes

• 

Slide the shelves and grill dish carrier towards you 
until they reach the front stop.

• 

Tilt them up at the front to clear the side supports, 
taking care not to spill the contents.

• 

Lift them clear.

• 

Wash the shelves and grill dish in hot soapy water.

• 

Reverse the above steps to put the shelves and grill 
dishes back again.

• 

Ensure that they are placed between the 2 support 
wires or correctly onto the runners.

Removing the shelf supports

• 

Grasp the shelf support at the front.

• 

Pull it firmly inwards.

Releasing the grill element

To release the grill element so that the oven roof can be 
accessed for cleaning, push the element upwards and 
rotate the 3 clips backwards and away from the element 
rod. This will allow the front of the element to drop down.

  WARNING

The door glass on this appliance is made from a 
tough, durable material that withstands heating 
and cooling without breaking. However, it must be 
remembered that it is GLASS, it may break. Treat it 
accordingly! Should you have any questions about 
the glass in your new appliance, please contact the 
customer care centre by dialling 1300 363 640.

Do not use harsh abrasive cleaners or sharp metal 
scrapers to clean the oven door since they can 
scratch the surface, which may result in shattering 
of the glass.

CLEANING YOUR APPLIANCE 

(CONTINUED)

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands