manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 38

38  electrolux.com.au

Hob2Hood

This is an advanced automatic function which connects 
the hob to a special hood. Both the hob and the hood 
have an infra-red signal communicator. The speed of 
the fan is defined automatically on the basis of the mode 
setting and the temperature of the hottest cooking zone 
on the hob. You can also operate the fan from the hob 
manually.

 IMPORTANT! 

For most hoods, the remote system is originally 
deactivated. Activate it before you use the function.  
For more information refer to your hood user manual.

Operating the function automatically

The default automatic mode from the factory is H5. 
You can change the automatic mode by following the 
instructions below. When you activate the job the hood 
will adjust the fan speed automatically. Please note the 
below table is a guide, the fan speed varies depending 
on the temperature measured on the cooking zones of 
the cooktop which can be affected by the heat setting(s) 
selected as well as the size and volume of what you are 
cooking.

Automatic modes

Automatic 
light

Boiling

1)

Frying

2)

Mode H0

Off

Off

Off

Mode H1

On

Off

Off

Mode H2

3)

On

Fan speed 1

Fan speed 1

Mode H3

On

Off

Fan speed 1

Mode H4

On

Fan speed 1

Fan speed 1

Mode H5

On

Fan speed 1

Fan speed 2

Mode H6

On

Fan speed 2

Fan speed 3

1.  The hob detects the boiling process and activates  

fan speed in accordance with automatic mode.

2.  The hob detects the frying process and activates  

fan speed in accordance with automatic mode.

3.  This mode activates the fan and the light and does  

not rely on the temperature.

Changing the automatic mode

1.  Deactivate the appliance
2.  Touch   for 3 seconds. The display comes on  

and goes off.

3.  Touch   for 3 seconds.
4.  Touch   a few times until   comes on.
5.  Touch   of the Timer to select an automatic mode.

 

IMPORTANT! 

To operate the hood directly on the hood panel, deactivate 
the automatic mode of the function.
When you finish cooking and deactivate the hob, the hood 
fan may still operate for a certain period of time. After that 
time the system deactivates the fan automatically and 
prevents you from accidental activation of the fan for the 
next 30 seconds.

USING THE INDUCTION HOB

 (CONTINUED)

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands