manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 47

47

  IMPORTANT

At the beginning of Pyrolytic cleaning the door will 
automatically lock   will appear on the display. 
During the Pyrolytic cleaning cycle there may be 
some burn off odours. It is advised to keep the 
room well ventilated during this cycle.

The door will only unlock when the oven has cooled to a 
safe temperature. Turning the function off will not unlock 
the door. This will only happen when safe temperatures  
are reached.
When the pyrolytic cleaning function is on, it is advisable 
not to use a cooktop. This may cause overheating and 
damage.

NOTE: The cooling fan will operate at an increased speed 
for Pyrolytic cleaning and will continue to run until the oven 
has cooled down. This is normal.

It is recommended to clean the oven regularly to keep it in 
its best condition.

After Pyrolytic cleaning

After cool-down wipe the ash out of the oven with a soft 
damp cloth and warm water.
To restore the enamel shine to more difficult areas, use a 
damp cloth with vinegar and detergent.

  CAUTION

Do not turn off the mains power supply to the  
oven during the Pyrolytic cycle. This could damage 
the appliance.

Select the Pyrolytic clean function. 

Use cooking function selector to pick the ‘pyro clean’ 
function.

Selecting the required cleaning cycle

Use the ‘cook time’ control to select Light, Medium or 
Heavy depending on the soiling of the oven. 

Start Pyrolytic 

Unlike other cooking functions, you MUST touch ‘OK’ for 
the pyrolytic cycle to start. The display will prompt you to 
remove all shelves and trays. You must touch’ OK’ again 
to start. The oven light will then go out and the Pyrolytic 
function will start.

CLEANING YOUR APPLIANCE WITH PYROLITIC CLEANING

 (CONTINUED)

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands