manualshive.com logo in svg

Electrolux EFE914, Installation & User Manual

Share
Download
Electrolux EFE914 Installation & User Manual Download Page 18

18  electrolux.com.au

6  Select ‘KEY TONE’ to turn the ‘beep on touch’  

on or off.

7  Select ‘SCREEN BRIGHTNESS’ to adjust the 

brightness of the display.

8  Select ‘SCREEN CONTRAST’ to adjust the contrast 

of the display.

9  Select ‘TEMPERATURE UNITS’ to change between 

Celsius and Fahrenheit units.

10  Select ‘ACTIVATE LOCK’ to turn child lock on.
11  Touch ‘OK’ to go into each selection to change  

its settings.

Safety cut-out features

The oven automatically switches itself off if the temperature 
is not adjusted or the appliance is left operating after a 
period of time. The oven switches itself off after:
• 

12.5 hours when the temperature is set between 
30°C and 120°C.

• 

8.5 hours when the temperature is set between 
120°C and 200°C.

• 

5.5 hours when the temperature is set between 
200°C and 250°C.

Demo mode

This mode is intended to be used in retail shops to 
demonstrate the oven functionality without any power 
consumption except to the oven lights.
The following instructions demonstrate how to enter and 
exit ‘DEMO’ mode.
1  Ensure the oven is off by touching the  

 ‘ON/OFF’ symbol.

2  Touch and hold the   ‘ON/OFF’ symbol until the 

display turns ON then OFF. Immediately after, touch 
both the cooktime symbols simultaneously. Hold 
until a triple beep sounds.

Condensation

Excess condensation may fog the oven door. This may 
happen when cooking large quantities of food from a cold 
start. Minimise condensation by:
• 

Keeping the amount of water used whilst cooking to  
a minimum.

• 

Making sure the oven door is firmly closed.

• 

Baking custard in a baking dish that is slightly smaller 
than the water container.

• 

Cooking casseroles with the lid on.

NOTE: If using water in cooking, this will turn to steam and 
condense outside your appliance. This is not a problem or 
fault with your oven.

USING THE OVEN 

(CONTINUED)

Summary of Contents for EFE914





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands