Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
DOC. NO. 5956.446.06
©Copyright 2005 by
Electrolux Professional
P.69/88
WT38MEDWS Prog.
045
4. Modify Factory parameters:
FAC
Enter into FAC parameter family and change boiler threshold.
bt°C 90
Boiler Temperature Threshold.
bHi 0
Disable boiler high Temperature alarm (
C 2
).
bAJ 0
Boiler Temperature Adjust.
bSt 0
Booster function not needed.
btd 10
During stand-by boiler is kept at lower temperature than Temperature Threshold.
tt°C 65
Tub Temperature Threshold.
tHi 85
Tank high Temperature limit.
5. Modify the cycle parameters:
CY1
Cycle 1 parameters family.
Ln1
4
Long Wash Phase [min]
Sh1
10
Short Wash Phase [s]
ri1
35
Rinse Phase Duration [s]
dr1
40
Drain [s]
FP1 15
Final Pause at End of Cycle
CY2
Cycle 2 parameters family.
Ln2
6
Long Wash Phase [min]
Sh2
10
Short Wash Phase [s]
ri2
35
Rinse Phase Duration [s]
dr2
40
Drain [s]
FP2 15
Final Pause at End of Cycle
CY3
Cycle 3 parameters family.
Ln3
9
Long Wash Phase [min]
Sh3
10
Short Wash Phase [s]
ri3
35
Rinse Phase Duration [s]
dr3
40
Drain [s]
FP3 15
Final Pause at End of Cycle
6. Modify Communication and HACCP parameters:
HCP
Enter into
HCP
parameter family and set the following parameters.
sEr 9
Dishwasher with incorporated continuous water softener.
7. Switch OFF and then switch ON the machine.
