Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
DOC. NO. 5956.446.06
©Copyright 2005 by
Electrolux Professional
P.6/88
4.
DETERGENT AND RINSE AID DOSAGE
In this paragraph is explained how to set the working time for the detergent and rinse aid dispensers.
For each dispenser there are two parameters: the initial time and the time during cycle execution.
GEn
General
Parameters
Sym. Parameter
Description
Unit Min Max
Factory
Default
dIn
Initial Detergent Dosage (during filling tank)
[s]
0
240
90
rIn
Initial Rinse Aid Dosage (starts when tank filled)
[s]
0
180
10
dEt
Detergent Dosage During Cycle Execution (during wash phase)
[s]
0
182(*)
8
rAi
Rinse Aid Dosage During Cycle Execution (when refilling boiler)
[s]
0
62 (*)
4
How change the duration:
•
Switch OFF and switch ON the dishwasher;
•
Enter into the USER SETTING mode by pressing and hold down ON/OFF and CYCLE_1 keys for at least
five seconds
the display
shows
GEn
(Fig.3.1);
•
Press CYCLE_INFINITE. The display shows alternatively the symbol
dIn
and the duration in seconds (Fig.3.2 and 3.3);
NOTE: If User Interface v.3.00 tank led is on if value correspond to factory default (Default 1, HOOD TYPE).
•
Use CYCLE_1 key to decrease the duration and CYCLE_2 key to increase (Fig.3.3);
•
After settled the duration press CYCLE_INFINITE key to
store value
. The display shows the next parameter (Fig.3.4) and the
corresponding value (Fig.3.5);
•
In the same way is possible to change the other duration; when finished switch OFF and switch ON.
Fig. 3.8
Cycle rinse aid dosage
rAi
©
ª
Fig. 3.9
Change time activation
7
©
ª
DEFAULT
Fig. 3.7
Change time activation
(Tank LED indicates default)
8
Fig. 3.6
Cycle detergent dosage
dEt
Fig. 3.2
Initial detergent dosage
dIn
©
ª
DEFAULT
Fig. 3.3
Change duration.
(Tank LED indicates default).
90
Fig. 3.4
Initial rinse aid dosage
rIn
©
ª
Fig. 3.5
Change duration
24
Fig. 3.1
Enter into User Mode
(press for 5 sec).
GEn
