Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
DOC. NO. 5956.446.06
©Copyright 2005 by
Electrolux Professional
P.58/88
WT30M Prog.
034
CY3
Cycle 3 parameters family.
Ln3
8
Long Wash Phase [min]
Sh3
35
Short Wash Phase [s]
pA3 5
Pause [s]
ri3
35
Rinse Phase Duration [s]
dr3
40
Drain [s]
FP3 60
Final Pause at End of Cycle [s].
dPA
Set other parameters.
rPA
45
Duration of pause after the rinse cycle [s].
C F
1
Fahrenheit.
6. Switch OFF and then switch ON the machine.
WT65M Prog.
035
1.
Switch OFF and then switch ON the machine.
2.
CFG
Enter into CFG parameter family and set the following parameters.
tYP 3
Medical line dishwasher with lock door/hood device.
boi 0
Atmospheric boiler.
doo 1
Front loading.
dFL 3
Default values for Undercounter models.
trc 1
SOFT START ENABLED.
b_t 1
Tank heater works only if boiler temperature reached.
btF 75
Enable filling tank by means of rinsing cycles.
LES 0
Detergent level switches not enabled.
UI 9
Select user interface hood type model
(up to version 3.11 set to
1
)
.
rE 0
Regeneration cycle disabled.
ALr 1
Alarms enabled.
3.
Switch OFF and then switch ON the machine.
4.
Modify Factory parameters:
FAC
Enter into FAC parameter family and change boiler threshold.
bt°C 92
Boiler Temperature Threshold.
bHi 0
Disable boiler high Temperature alarm (
C 2
).
bAJ 0
Boiler Temperature Adjust.
bSt 0
Booster function not needed.
btd 10
During stand-by boiler is kept at lower temperature than Temperature Threshold.
tt°C 65
Tub Temperature Threshold.
tHi 85
Tank high Temperature limit.
