Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
DOC. NO. 5956.446.06
©Copyright 2005 by
Electrolux Professional
P.38/88
WT30 USPH
Prog. 015
1.
Switch OFF and then switch ON the machine.
2.
CFG
Enter into CFG parameter family and set the following parameters.
tYP 0
Hood Type like working cycles.
boi 0
Atmospheric boiler.
doo 2
Front loading.
dFL 3
Default values for Undercounter models.
trc 0
(for this appliance SOFT START is NOT possible).
b_t 1
Tank heater works only if boiler temperature reached.
btF 75
Enable filling tank by means of rinsing cycles.
LES 0
Detergent level switches not enabled.
UI 8
ACTIVE function disabled
(up to version 3.11 set to
0
)
.
rE 0
Regeneration cycle disabled.
ALr 1
Alarms enabled.
3.
Switch OFF and then switch ON the machine.
4.
Modify Factory parameters:
FAC
Enter into FAC parameter family and change boiler threshold.
bt°C 82
Boiler Temperature Threshold.
btd 3
During stand-by boiler is kept at lower temperature than Temperature Threshold.
bSt 0
Booster Function not necessary.
tt°C 66
Tank Temperature Threshold.
tHi 80
High limit for tank temperature.
5.
Modify the cycle parameters:
CY1
Cycle 1 parameters family.
Ln1 1
Long Wash Phase [min]
Sh1 22
Short Wash Phase [s]
ri1 25
Rinse Phase Duration [s]
dr1 40
Drain [s]
FP1 4
Final Pause [s]
CY2
Cycle 2 parameters family.
Ln2 2
Long Wash Phase [min]
Sh2 22
Short Wash Phase [s]
ri2 25
Rinse Phase Duration [s]
dr2 40
Drain [s]
FP2 4
Final Pause [s]
CY3
Cycle 3 parameters family.
Ln3 4
Long Wash Phase [min]
Sh3 22
Short Wash Phase [s]
ri3 25
Rinse Phase Duration [s]
dr3 40
Drain [s]
FP3 4
Final Pause [s]
