Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
DOC. NO. 5956.446.06
©Copyright 2005 by
Electrolux Professional
P.64/88
WT38PM50 / WT38PM60
Prog. 039
drn
Drain parameters family.
Idr 30
Initial Drain Phase Duration [s]
dPA
Set other parameters.
IPA 5
Initial Pause [s]
6. Switch OFF and then switch ON the machine.
LU7P / LU700P / WTU40P
Prog. 040
1.
Switch OFF and then switch ON the machine.
2.
CFG
Enter into CFG parameter family and set the following parameters.
tYP 0
Hood Type like working cycles.
boi 1
Pressure boiler.
doo 2
Front loading.
dFL 1
Default values for Hood Type models.
trc 3
SLOW SOFT START ENABLED
b_t 1
Tank heater works only if boiler temperature reached.
btF 0
The tank is filled into the traditional way.
LES 0
Detergent level switches not enabled.
UI 8
ACTIVE function disabled
(up to version 3.11 set to
0
)
.
rE 0
Regeneration cycle disabled.
ALr 1
Alarms enabled.
3.
Switch OFF and then switch ON the machine.
4.
Modify Factory parameters:
FAC
Enter into FAC parameter family and change boiler threshold.
bt°C 84
Boiler Temperature Threshold.
bAJ 0
Boiler Temperature Adjust.
bSt 1
Booster Function.
5.
Modify the cycle parameters:
CY2
Cycle 2 parameters family.
Ln2
1
Long Wash Phase [min]
Sh2
10
Short Wash Phase [s]
CY3
Cycle 3 parameters family.
Ln3
4
Long Wash Phase [min]
6.
Switch OFF and then switch ON the machine.
