Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
DOC. NO. 5956.446.06
©Copyright 2005 by
Electrolux Professional
P.10/88
To modify thresholds do the following:
•
Switch OFF and switch ON the dishwasher;
•
Enter into the FACTORY SETTING mode by pressing and hold down ON/OFF and CYCLE_2 keys for at least five seconds (Fig.5.1);
•
Press CYCLE INFINITE. The display shows alternatively the symbol
bt°C
(Fig.5.2) and the corresponding value
76
(Fig.5.3);
•
Use CYCLE_1 key to decrease the value and CYCLE_2 key to increase (Fig.4.3);
•
Press CYCLE INFITE key to confirm. The display shows the next parameter (Fig.4.4) and the corresponding value (Fig.4.5);
•
In the same way is possible to change the other parameters; when finished switch OFF and switch ON.
At the end the display will show again ‘
FAC’
and by pressing CYCLE_2 key (Fig.4.9) is possible to change cycle duration (see next
paragraph).
Fig. 5.9
Factory setting mode
FAC
Fig. 5.10
Next Family
FAC
Fig. 5.11
Cycle 1 Family:
ENTER
CY1
©
ª
Fig. 5.7
Change value &
Store
96
bLo
Fig. 5.6
Tank temp. High limit.
bHi
©
ª
Fig. 5.5
Change value &
Store
2
Fig. 5.1
Factory setting mode
FAC
Fig. 5.2
Boiler temp. threshold
bt°C
©
ª
Fig. 5.3
Change value &
Store
76
Fig. 5.4
Boiler Temp Hysteresis
btH
