Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
DOC. NO. 5956.446.06
©Copyright 2005 by
Electrolux Professional
P.37/88
WT38 MED
Prog. 014
1.
Switch OFF and then switch ON the machine.
2.
CFG
Enter into CFG parameter family and set the following parameters.
tYP 0
Hood Type like working cycles.
boi 0
Atmospheric boiler.
doo 2
Front loading.
dFL 3
Default values for Undercounter models.
trc 1
SOFT START ENABLED.
b_t 1
Tank heater works only if boiler temperature reached.
btF 75
Enable filling tank by means of rinsing cycles.
LES 0
Detergent level switches not enabled.
UI 8
ACTIVE function disabled
(up to version 3.11 set to
0
)
.
rE 0
Regeneration cycle disabled.
ALr 1
Alarms enabled.
3.
Switch OFF and then switch ON the machine.
4.
Modify Factory parameters:
FAC
Enter into FAC parameter family and change boiler threshold.
bt°C 90
Boiler Temperature Threshold.
bHi 0
Disable boiler high Temperature alarm (
C 2
).
bAJ 0
Boiler Temperature Adjust.
bSt 0
Booster function not needed.
btd 10
During stand-by boiler is kept at lower temperature than Temperature Threshold.
tt°C 65
Tub Temperature Threshold.
tHi 85
Tank high Temperature limit.
5.
Modify the cycle parameters:
CY1
Cycle 1 parameters family.
Ln1 4
Long Wash Phase [min]
Sh1 10
Short Wash Phase [s]
ri1 35
Rinse Phase Duration [s]
dr1 40
Drain [s]
FP1 15
Final Pause at End of Cycle
CY2
Cycle 2 parameters family.
Ln2 6
Long Wash Phase [min]
Sh2 10
Short Wash Phase [s]
ri2 35
Rinse Phase Duration [s]
dr2 40
Drain [s]
FP2 15
Final Pause at End of Cycle
CY3
Cycle 3 parameters family.
Ln3 9
Long Wash Phase [min]
Sh3 10
Short Wash Phase [s]
ri3 35
Rinse Phase Duration [s]
dr3 40
Drain [s]
FP3 15
Final Pause at End of Cycle
6.
Switch OFF and then switch ON the machine.
