122
Top outer glass spacer:
1. With the outer door glass removed the top outer glass
spacer may be removed by removing one screw from
each end.
One screw at each end
Center door glass:
1. The center door glass is held in place by two brackets
that are held to the wool shield by two screws on
each side.
2. To remove the center glass remove the outer door
glass, and one of the brackets by removing the two
screws from the bracket and sliding the glass out.
Center glass bracket
Wool shield:
1. The wool shield is held to the inner door liner by two
screws.
2. To remove the wool shield, remove the outer door
glass, the two screws holding shield to the inner
liner and lift the wool shield off.
Oven door trim screw
Door trim bottom screws
Oven door handle:
1. The oven door handle is held to the oven door trim
by four screws, two in each top corner. To remove
the handle remove the trim from the door and remove
the four screws.
Oven door handle screws
Outer door glass:
1. With the door trim removed the outer door glass may
be lifted off.
Summary of Contents for 30" GAS FREESTANDING RANGES
