Electrolux 30" GAS FREESTANDING RANGES, Service Manual

Page: 9 / 132

9
Once the oven controls are set 87
For a delayed start time and shut-off automatically 88
To broil 88
To set the oven control for self-clean cycles 88
Calibrating oven temperature 89
How the electronic oven control system on a 36” gas range operates 89
Preheat 89
Bake 90
Broil 90
Clean 90
Calibration 91
To change calibration 91
Troubleshooting 91
F1 code 91
F3 code 91
Door code 91
Control will not program 91
Blank display 91
No heat 92
Control operates normally but the bake
and broil burners do not heat
92
Broil burner operates but the bake burner does not heat 92
Bake burner operates but the broil burner does not heat 92
Self-cleaning 92
Oven does not heat in self-clean 92
Oven heats in self-clean but the oven is not clean 92
Sample schematic for 36” gas range 93
Warmer drawer 94
To set the warmer drawer control 94
How the warmer drawer circuit works 94
Troubleshooting 94
If the element does not heat 94
If the element heats during preheat then stays off
until the temperature drops to about 130 degrees
95
Element does not cycle off 95
Warmer drawer is slow to preheat 95
Warmer drawer heats but indicator light does not glow 95
SECTION D - DISASSEMBLY AND REPLACEMENT OF PARTS 96 - 129
30” gas ranges 96 - 112
Removing backguard back panel 96
Removing infinite switches 96
Removing indicator light 97
Removing electronic oven control 97
Removing oven light switch 97
Removing the control panel 97
Removing the end cap 97
Removing the main top 98
Removing sealed burner base 99
Removing top burner igniter 99
Removing fixed top orifice sealed burner 99
Removing manifold panel sealed burners 99
Removing burner pan 100
Removing top burner igniter switches 100
Removing top burner valve 100
Removing the manifold pipe 101
Removing the latch mechanism 101
Oven door 101