![Electrolux 30](http://html.mh-extra.com/html/electrolux/30-gas-freestanding-ranges/30-gas-freestanding-ranges_service-manual_91284088.webp)
88
b. The control will beep 3 times.
c. The control will then continue to beep once every 10
seconds for 5 minutes or until
CANCEL
is pushed.
For a delayed start time and to shut off automatically:
Follow steps 1-4 above, THEN:
5. Push the
STOP TIME.
The time when baking will
stop will appear in the display window. The words
"BAKE STOP TIME" will glow in the display.
6. Push and hold the
UP ARROW
until the time that
you want cooking to be completed appears in the
display.
7. Push the
BAKE
"— — —°" will appear, and the word
"BAKE" will flash in the display.
8. Push and hold the
UP ARROW
until the desired
baking temperature appears in the display.
9. If the baking temperature is not set, the control will
beep. "— — —°" and the word "BAKE" will flash in
the display.
10. The control will calculate backward from the set stop
time to determine when the baking should begin.
The words "DELAY" and "BAKE STOP TIME" will
glow in the display.
11. The baking will come on automatically at the
calculated time. At that time, the word "DELAY" will
go out and "ON" will appear.
12. To cancel the countdown, press
CANCEL
.
When the set BAKE/COOK TIME runs out:
a. ":00" will appear in the display window and the oven
will shut off automatically.
b. The control will beep 3 times.
c. The control will then continue to beep once every 10
seconds for 5 minutes or until
CANCEL
is pushed.
To Broil:
NOTE: Close the oven door to the broil stop position
when broiling.
1. Push
VARI BROIL.
"— — —" and the word "BROIL"
will flash in the display.
2. Push and hold the
UP or DOWN ARROW
until the
desired broil setting level appears in the display.
3. When broiling is finished, push
CANCEL.
Setting
Doneness
LO (LOW)
Well done
HI (High)
Rare
OVEN CLEANING
To Start the Self-Clean Cycle:
*
We recommend a 2 hour self-clean cycle for
light soils
,
a 3 hour cycle for
average soils
, and a 4 hour cycle for
heavy soils
.
To Set the Controls for the Self-Cleaning Cycle To
Start Immediately and Shut Off Automatically:
1. Be sure the clock shows the correct time of day
and the door is closed.
2. Push
CLEAN
. "CLN TIME" will flash in the display.
3. Push and hold the
UP or DOWN ARROW
until "3
HR:00" appears in the display. Set the cleaning time
based on the amount of soil you have—light, medium
or heavy.
4. Move the door locking lever to the right. If the locking
lever is not moved, the control will display the word
"DOOR" and beep 3 times, with a single beep every
10 seconds until the locking lever is moved. If the
locking lever is not moved within 30 seconds, the
clean function will be automatically cancelled.
5. The word "CLEAN" will be displayed. The "OVEN"
light will come on and cycle with the oven elements.
To Stop or Interrupt a Self-Cleaning Cycle:
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fire:
1. Push
CANCEL.
2. Once the oven has cooled down and the word
"LOCKED" shown in the display has gone out, then
the oven door can be opened.
To Set the Controls for the Self-Cleaning Cycle To
Start at a Delayed Time and Shut off Automatically:
Follow steps 1-3 above, THEN:
4. Push
STOP TIME
. The time of day that the self-
Summary of Contents for 30" GAS FREESTANDING RANGES
