Electrolux 30" GAS FREESTANDING RANGES, Service Manual

Page: 4 / 132

4
Grounding instructions 32
Check operation 32
Check igniters 32
Non self clean models 33
Adjusting simmer setting 33
Leveling the range 33
Anti-tip bracket installation 33
SECTION B - GAS FLOW 35 - 38
Gas flow 35
Electric circuits 36
How gas flow system works 37
Troubleshooting 37
Burner flame too large 37
Burner flame too small 37
Burner flame yellow tipped 37
Top burner flame lifts off 37
Top burner spark ignition system 38
How it works 38
Troubleshooting 38
Igniters do not spark 38
Igniter system works normal for all but one valve 38
Igniter sparks at normal rate with all valves turned off 38
Igniter sparks intermittently with all valves turned off 38
SECTION C - ELECTRONIC OVEN CONTROL SYSTEMS 39 - 94
ES 100 oven control system 39 - 43
How to program the ES 100 control 39
To set the clock 39
To set the minute timer 39
To change the minute timer while in use 39
To set the control for baking 39
To change the oven temperature after baking has started 40
To set the oven control for broil 40
How the ES 100 system operates 40
Bake 40
Broil 41
Calibration 41
To change calibration 41
Troubleshooting 41
F1 code 41
F3 code 41
Control will not program 42
Blank display 42
No heat 42
Sample schematic for ES 100 control system 43
Es 200 oven control system 44 - 51
How to program the ES 200 44
Temperature conversion 44
To set the clock 44
To set the minute timer 44
To change the minute timer while in use 45
To set the control for baking 45
To change the oven temperature after baking has started 45
To set the control for continuous bake or 12 hour energy saving 45
To set the control for oven lockout feature 45
To set the control to broil 45
To set the control for a self-clean cycle 46
When the self-clean cycle is complete 46