EHRLE HS 1040 Series, Operating Instruction

Page: 52 / 117

Hochdruck-Reinigungs-Systeme High-Pressure-Systems
115
2.6.3 Manufacturer tests and certi cates
Before delivery the High Pressure Cleaner passed the following factory tests:
• Heat coil water pressure test with 350 bar.
• High Pressure Cleaner factory test (factory test protocol is included in the
scope of delivery).
2.6.4 Emissions regulations
The heating installation of the EHRLE High Pressure Cleaner underlie the
regulations of re equipments. According to these regulations oil- or gas red
high pressure cleaners have to be checked annually by your responsible
district chimney sweep to ensure observance of the emission limit values. The
rst check has to be done during the rst month of operation. The operator of
the High Pressure Cleaner must arrange for the measurement to be
performed.
2.6.5 Notes for place of use
When operating the High Pressure Cleaner within con ned spaces, ensure
that safe exhaust facilities are provided for smoke fumes (see 2.2.13, chimney
installation for series HS and HSG). Care must also be taken to provide ade-
quate ventilation (combustion gas). It is not allowed to operate the High
Pressure Cleaner central unit in wet areas or in spaces with in amable or
aggressive atmosphere.