EHRLE HS 1040 Series, Operating Instruction

Page: 36 / 117

Hochdruck-Reinigungs-Systeme High-Pressure-Systems
99
2.2.6 Installing the fuel oil supply for series HS
Only specially trained and quali ed personal are allowed to install
the fuel oil container and the fuel oil pipes.
To ensure the operating safety of the High Pressure Cleaner use
only home heating oil EL 51 603 or Diesel oil. Otherwise injury to
persons may result.
Contaminated, hydrated or sulfurous heating oil will cause burner
problems and will lower its ef ciency. Damages to the High
Pressure Cleaner may result.
Installation of the fuel oil container
The installation of the fuel oil container (5, gure 1) in the high pressure
cleaner assembly room must comply with regulations for the storage of in a
mable liquids. These regulations may be ordered from the
Carl Heymanns-Verlag
Luxemburger Str. 449
50939 Cologne
Use only Diesel oil or home heating oil EL 51 603.
For further informations ask your local authority.
Installation of the fuel oil pipes
For installing fuel oil pipes (7 and 8, gure 1) see following table and gure 11.
Only pipes with a inside diameter from 6 to 12 mm are considered in this
operating instruction.
Observe also local planning authority regulations.
The fuel oil supply requires a 2-line system (suction and return pipe). For a
central fuel oil supply a maximum fuel oil pressure of 0.5 bar is permissible.
WARNING
ATTENTION