EHRLE HS 1040 Series, Operating Instruction

Page: 32 / 117

Hochdruck-Reinigungs-Systeme High-Pressure-Systems
95
Installing the central unit with wall mounting device
For mounting the central unit with the wall mounting device,
ensure proper load bearing capacity of the wall.
Install the central unit via wall mounting device only on strong concrete struc-
tures with suitable anchors.
For installing the central unit with wall mounting device (see also following
gure) proceed as follows:
• Fix the wall mounting brackets on the central unit’s rear side.
• Copy the mounting hole separation with a cardboard sheet and transfer this
to the wall.
• Fix the central unit on the wall by using injection-anchors or bolts going
through the wall with anchor plates.
Figure 10 Installing the central unit via wall mounting device
WARNING