EHRLE HS 1040 Series, Operating Instruction

Page: 45 / 117

Hochdruck-Reinigungs-Systeme High-Pressure-Systems
108
Speci cation for the gas burner check and adjustment
Type of fuel natural gas (Hu 10.4 kW/m³)
Natural gas pressure 20 - 25 mm WS pressure of uidity
Burner air squeezing medium air sqeezing
Allowed exhaust values
Exhaust temperature 150 - 170 °K
Carbon dioxide 10.0 - 11.0 CO2 in %
Carbon monoxide 25 - 50 ppm
Soot number 0 according to Bacharach
Exhaust power loss 8 - 11 %
2.3.4 Commissioning the High Pressure Cleaner
Lethal voltage exists in the High Pressure Cleaner. If human life is
in danger, press the push button “Emergency Off” (10, gure 11
and gure 12) on the control panel of the central unit or on the
remote control.
The High Pressure Cleaner jet must not be directed to persons,
animals or voltage supplied electrical equipment (machines,
devices, cables, electrical power outlets etc.).
Disconnect electrical equipment from power outlet, before
cleaning.
The scope of delivery of the series HSG includes the “Installation
and Operating Instructions” from the gas burner manufacturer
(original equipment manufacturer). For commissioning the series
HSG, observe the “Installation and Operating Instructions” for the
gas burner.
High Pressure Cleaning systems equipped with several remote
control units provide simultaneous commissioning and total
system control via every remote control.
NOTE
WARNING