EHRLE HS 1040 Series, Operating Instruction

Page: 49 / 117

Hochdruck-Reinigungs-Systeme High-Pressure-Systems
112
2.3.5 Operating the High Pressure Cleaner via self service coin acceptor
For the rst commissioning of the self service coin acceptor or after a power
failure proceed as follows:
• Insert coin into the self service coin acceptor.
• Press push button “Pump On-off“ (1, gure 12 or gure 13) or on the remote
control (3, gure 2). If desired, press the push button “Heating On-Off“ (4,
gure 12 or gure 13).
The High Pressure Cleaner system is now prepared for self service operation.
Further information for operating the High Pressure Cleaner is contained in
section 2.3.4.
Insert only one coin for each cleaning period. Inserting coins one
after the other during the same cleaning period doesn’t increase
the operation period.
For proceeding with normal self service operation after a cleaning period insert
another coin.
2.4 Applying the cleaning detergent (chemical)
For the cleaning tasks a cleaning detergent may be admixed to the high pres-
sure jet.
In order to protect the environment, we recommend that detergent is used
sparingly. Comply with the metering recommendation on the detergent contai-
ner label.
Use only cleaning detergent or chemicals recommended by the
manufacturer. Otherwise the High Pressure Cleaner safety may
be affected.
Order the cleaning detergent and chemical list from the manufacturer.
The High Pressure Cleaner is designed for the connection of two external
cleaning detergent containers (9 and 10, gure 1).
Always activate only push button “Chemical I On-off” (2, gure 12
or gure 13) or “Chemical II On-off” (3, gure 12 or gure 13) for
cleaning tasks. Activating both push buttons together at the same
time may cause dangerous chemical reactions for human health
or damage components.
NOTE
WARNING
WARNING