59
Introduction to Use of the PR-1000HD —
Assigning Materials to Palettes
Introduction
Clips in the palette can be arranged in any order you like. You can assign materials to the clips. Select
materials from the Materials list.
This procedure is carried out in the Edit Mode screen (p. 41).
fig.editmode03.eps
1.
Switch to Edit mode.
The Edit Mode screen is displayed when you click the [Edit Mode] button in the upper right of
the Play Mode screen.
2.
Click one palette from the “Palettes” list to select the palette.
The “Clips” list for the selected palette appears.
3.
Assign materials to the palettes as clips.
Select and drag one material from the “Materials” list and drop it in the position in the “Clips”
list to which you want the material assigned.
You can confirm the clip in the video output monitor and the material in the thumbnails.
fig.editmode04.eps
When you select multiple materials (select materials while holding down the Shift key) and drop them
into the “Clips” list, the materials are assigned in order of the material list, starting from the position
where they are dropped.
Assigning Materials to Palettes
Palettes list
Clips list
Materials list inside project
Clip preview monitor
Thumbnail
When you drop a material in a
position where a clip is already
assigned, the earlier material is
replaced by the one you drop
there.
PR-1000HD_e.book 59 ページ ２００８年１月２１日 月曜日 午後８時３５分
Summary of Contents for PR-1000HD
