51
Introduction to Use of the PR-1000HD —
Creating and Opening Projects
Introduction
■
Creating Projects
This procedure creates a new project.
1.
Click the “Open” button in the upper part of the Play Mode screen (p. 38) or Edit
Mode screen (p. 41).
The “Open” dialog appears.
fig.open01.eps
2.
Select the disk to which you want to save the project from the “Drives” list.
3.
Click the [New] button.
4.
“New Project” appears highlighted in the “Projects” list. Use the keyboard to
enter the project name.
5.
After entering the name, confirm it by pressing the [Enter] key on the keyboard.
6.
Click the [Open] button.
The created project opens.
Make sure that you have some
extra space in the removable
hard disk drives on which
you’re creating your project.
If you’ve connected two
removable hard disk drive units,
the unit connected to removable
hard disk drive bay (1) is shown
in the upper position within the
“Drives” list, while the unit
connected to removable hard
disk drive bay (2) appears
below it.
Drives list
New
Open
Cancel
Projects list
PR-1000HD_e.book 51 ページ 2008年1月21日 月曜日 午後8時35分
Summary of Contents for PR-1000HD
