Edirol PR-1000HD Owner'S Manual Download

Page: 104 / 132

104

Practical Use of the PR-1000HD —

Making the System Settings

■

Making the Touch Panel Display Settings

You can connect a touch panel display and control the PR-1000HD by directly touching the touch
panel display.

Using the USB cable included with the touch panel display, connect the USB connector of the touch
panel display to the PR-1000HD’s USB connector. Use a DVI-I cable (VGA cable) to connect the display
connector.

Set the positions (calibrate) the touch panel when using a touch panel display with the PR-1000HD.

* Before you power up the PR-1000HD, check the connections of the touch panel display, and power up the

display first.

Click the [System Preferences] button in Selector.

The System Preferences window appears.

Select [Use] in the “Touch Panel Display” settings, then click “Calibration.”

The system restarts automatically.

When the system has started up, the Calibration screen appears.

fig.touchpanel.eps

Touch the center of the target. (It will be displayed three times.)

The target will disappear successively, and when you touch the last target,

the

and

will disappear.

When you’ve finished making the setting, touch

The targets will disappear successively, and you will return to the system settings.

■

Other system settings

From the same screen, you can also specify the date and time (p. 46).

As the touch panel display,
please use an IntelliTouch
compatible display made by
ELO TouchSystems
(http://elotouch.com/).

If you failed to touch the center
of the target, touch the screen
several times to make it

display

and .

Then touch

and

repeat the procedure from step
3.

You’ll need to restart if you
change the “Output resolution”
(p. 98), or “Network settings”
(p. 100).

PR-1000HD_e.book 104 ページ２００８年１月２１日　月曜日　午後８時３５分

Summary of Contents for PR-1000HD





































































































































Search results

Summary of Contents for PR-1000HD

Reviews:

Related manuals for PR-1000HD

Brands by name

Popular brands

Edirol PR-1000HD, Owner'S Manual

Search results

Summary of Contents for PR-1000HD

Reviews:

Related manuals for PR-1000HD

Brands by name

Popular brands