Edirol PR-1000HD, Owner'S Manual

Page: 49 / 132

49
Introduction to Use of the PR-1000HD —
Turning the Power On and Off
Introduction
■
Turning Off the Power
1.
Turn the volume levels down completely on any audio equipment (amps,
mixers, etc.) connected to the PR-1000HD.
2.
Turn off the power to the PR-1000HD.
When Using Selector:
Click the [Power off] button.
When Using Presenter:
2-1.
Click the [EXIT] button at the upper left of the screen.
fig.playmode04.eps
2-2. The message “Do you want to shut down?” appears; click the [Power off] button.
When Using [POWER] button:
2-1. Press the PR-1000HD’s [POWER] button.
fig.front.power.eps
2-2. The message “Are you sure you want to shut down?” appears; click the [OK] button.
fig.poweroff.eps
After the step above, the front panel PWR indicator will go out. After this, please continue with the
following steps to complete the procedure.
3.
Switch off the power on all peripheral equipment that is connected to the PR-
1000HD.
4.
Set the PR-1000HD’s rear panel power switch to the [o] position.
[EXIT] button
POWER button
If a project has not been
saved, the message “Would
you like to save the current
project?” appears. If you want
to save the project, click the
[Save] button.
Do not hold down the
[POWER] button for four
seconds or longer.
PR-1000HD_e.book 49 ページ ２００８年１月２１日 月曜日 午後８時３５分