Edirol PR-1000HD, Owner'S Manual

Page: 40 / 132

40
Introduction to Use of the PR-1000HD —
Names of Things in Screens/What They Do
o. Transition effect palette
o-1.
Transition effect settings buttons
Here you can select the type of transition effect. For details on
operation, refer to “Transition Effects” (p. 56).
o-2. [Transition Effect Time] slider
This adjusts the time of the transition effect. You can specify a time
between 0 seconds and 4 seconds.
By clicking the triangle located at the default value you can reset
this to the default value. For details on operation, refer to
“Transition Effects” (p. 56).
p. Audio settings panel
p-1. Volume level meter
This indicates the volume level.
p-2. [Audio] slider
This adjusts the volume when playing back audio.
By clicking the triangle located at the default value you can reset
this to the default value.
q. [Audio] Slider
This adjusts the volume during audio playback.
You can reset to standard values by clicking the triangle at the position corresponding to the standard
value.
r. [Defaults] Button
Restores the three sliders to the standard values. The standard settings are shown below.
• [Transition Effect Time] Slider: 0.0 sec.
• [Audio] Slider: 0 dB
• [Playback Speed] Slider: 100%
s. Palette Area
Displayed here are thumbnails of the clips contained in the palette and their settings. Clicking on a
thumbnail starts playback of the clip, and the video images are displayed in the monitor.
Also displayed are the clips’ Loop playback settings.
s-1. Keyboard identifier used when a clip is played back
with the keyboard (p. 54).
s-2. Loop Mode setting, set separately for each
individual clip (p. 72).
s-3. Length of clip from the In point to the Out point.
s-4. This is the length of the transition time specified for
each clip (p. 72).
s-5.
This is the loop mode setting specified for each clip (p. 72).
s-6.
This is the file format of the clip.
• : Playback stops at the final frame or the
out point.
• : Clip plays repeatedly.
• : The next clip is played back.
• : The next clip is selected.
• : The specified clip is played
back.
o-2
o-1
p-2
p-1
You can adjust the volume for
each clip independently (p.
73).
You can reset the sliders to
standard values by clicking the
triangle at the position
corresponding to the standard
value.
s-5
s-1
s-6
s-2
s-4
s-3
PR-1000HD_e.book 40 ページ ２００８年１月２１日 月曜日 午後８時３５分