manualshive.com logo in svg

Edirol PR-1000HD, Owner'S Manual

Share
Download
Edirol PR-1000HD Owner'S Manual Download Page 118

 

118

 

Appendix — 

 

RS-232C command reference (Presenter)

 

For information regarding the RS-232C settings, refer to “Using the RS-232C Connector” (p. 95).

 

■

 

Command overview

 

A command consists of an ASCII code sequence containing “

 

stx

 

,” two alphabetical characters, and a 

semicolon (“;”). The two alphabet characters show the command type. Arguments can be added to the 
command and they are separated from the two alphabet characters with a colon (“:”) and multiple 
arguments are themselves separated by commas (“,”).

“

 

stx

 

”

The ASCII code signal name (code number: 02H (hexadecimal)) and code that signals 
the command start.

“

 

:

 

”

Code used by Presenter to separate the command and its arguments.

“

 

;

 

”

Code used by Presenter to signify the end of a command.

Example 1: 

To start playback, send the ASCII command: 

 

stxPL;.

 

Example 2: 

To start the playback of video clip number 2 in palette number 0, send the ASCII 
command: 

 

stxPA:0,2;

 

.

 

■

 

About the protocol

 

Depending on the command, there are three different types of communication protocols.

 

Specifying an action and making a setting to Presenter

 

1.

 

Transmit the command from the control device to Presenter.

 

2.

 

If received correctly, Presenter returns ACK; and if an error occurs, Presenter 
returns ER.

 

“

 

ACK

 

” is an ASCII code signal name (code number 06H0 the tells the control device that the command 

was correctly received).

 

Querying a Presenter setting

 

1.

 

Transmit the command from the control device to Presenter.

 

2.

 

If received correctly, Presenter returns the setting as a command; and if an 
error occurs, Presenter returns ER.

 

3.

 

If the command from Presenter was received correctly, an ACK is returned (this 
ACK can be omitted).

 

*

If an ER command is sent to Presenter, Presenter will resend the command it sent in 

 

step 2

 

. This can also 

be omitted, in which case the procedure must be repeated from 

 

step 1

 

.)

 

Having Presenter automatically send commands

 

1.

 

Presenter sends a command automatically. Returning an ACK or other 
command is not necessary.

 

RS-232C command reference (Presenter)

PR-1000HD_e.book 118 ページ ２００８年１月２１日　月曜日　午後８時３５分

Summary of Contents for PR-1000HD





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands