Edimax BR-6478 AC V2, User Manual, Page: 59 / 177

55
your computer’s MAC address.
DNS Address Select “Obtain an IP address automatically” or
“Use the following IP address”. Check with
your ISP if you are unsure.
DNS Address 1, 2 &
3 Enter the DNS address(es) assigned by your
ISP here.
TTL Enable or disable TTL.
Service Name Give this Internet service a name (optional).
MTU Enter the maximum transmission unit (MTU)
value of your network connection. The
default value is 1392.
Connection Type Specify a connection type:
1.
“Continuous”: Connected all the time.
2. “Connect on Demand”: Connect when you
initiate an Internet connection.
3. “Manual”: Connect/disconnect manually
using the “Connect” and “Disconnect”
buttons.
Idle Time Out Specify the amount of time the router waits
before shutting down an idle connection.
Only available when “Connect on Demand”
(above) is selected.
Enable Dual-WAN
Access Enable/disable dual WAN access. When you
enable dual WAN access, select an IGMP
source and enter a “Host Name” and “MAC
Address”.