Edimax BR-6478 AC V2, User Manual

Page: 108 / 177

104
Enable Static Routing Check/uncheck the box to enable/disable
static routing.
Destination LAN IP Enter the destination network’s IP address.
Subnet Mask Enter the subnet mask of the destination
network.
Default Gateway Enter the default gateway of the destination
network.
Hop Count Enter the hop count (the distance between
destination network and this broadband
router) here.
Interface Enter the interface which leads to
destination network.
Add Add the route to the current static routing
table.
Static Routing Table entries will be displayed in the table shown below:
Delete Selected/
Delete All Delete selected or all entries from the table.
III-3-9-2. Port Forwarding
This function allows you to redirect a single port or consecutive ports of an
Internet IP address to the same port of a local IP address. The port number(s)
of the Internet IP address and local IP address must be the same.
If the port number of the Internet IP address and local IP address is different,
please use the “Virtual Server” function instead.