Edimax BR-6478 AC V2, User Manual, Page: 44 / 177

40
II-6. WPS Setup
If your wireless device supports WPS (Wi-Fi Protected Setup) then you can use this
method to connect to the BR-6478 AC V2’s Wi-Fi network.
1.
Press the WPS/Reset button on the BR-6478 AC V2 for 2 seconds to activate
WPS. The LED will then flash blue to indicate that WPS is active.
2.
Within two minutes , press the WPS button on the wireless device/client to
activate its WPS.
3.
The devices will establish a connection. Repeat for additional wireless devices.
Please check the instructions for your wireless device for how long
you need to hold down its WPS button to activate WPS.
II-7. Reset to Factory Default Settings
If you experience problems with your BR-6478 AC V2, you can reset the device
back to its factory settings. This resets
all settings back to default.
1.
Press and hold the WPS/Reset button found on the rear base of the
product for at least 10 seconds.
2.
Release the button when the LED is flashing blue.
3.
Wait for the BR-6478 AC V2 to restart.