ECKELMANN Case Controller UA 4 E Series, Operating Instruction

Page: 434 / 466

Firmware V3.13 21.04.2021 434/466
9.7.6 Menu 5 Archive KR 160 E
ARCHIVE POS: XXXXX
dd.mm.yy hh:mm Time of archiving Data Record 1
Zone 1: abcdef x °C Status and temperature of Zone 1, see note *)
Zone 2: abcdef x °C Status und Temperatur von Zone 2, s. Anmerkung *); shown only when two-zone
operation is set (Menu 6-1)
...
dd.mm.yy hh:mm Time of archiving Data Record n
Zone 1: abcdef x °C Status and temperature of Zone 1, see note *)
Zone 2: abcdef x °C Status und Temperatur von Zone 2, s. Anmerkung *); shown only when two-zone
operation is set (Menu 6-1)
Example Zone 1: abcdef x °C
Single-zone operation resp. Operator interface BT
300 Two-zone operation
a O = Operation O = Operation
b R = Refrigeration / Cooling R = Refrigeration / Cooling
c R = Refrigeration/ Cooling D = Defrost
d D = Defrost G = Gate / Door (coldroom controller only)
e G = Gate / Door (coldroom controller only) A = Alarm
f A = Alarm
*) Status abcdef covers following states of refrigeration point. The entry at this position is - when a
state is not active.
