ECKELMANN Case Controller UA 4 E Series, Operating Instruction

Page: 342 / 466

Firmware V3.13 21.04.2021 342/466
•
ALARMPRIOS POS: XXXXX Entry Default
wrong ctrlr type Configuration error: Invalid controller type set on DIP
Switch S3. Priority applies to
Wrong Controller Type
alarm
-, 0..99 0
emerg.cut-out SH Superheat drop below minimum level for duration of
delay time -, 0..99 0
OD manual Valve opening degree defined by manual entry.
Priority applies to alarms
VO Manual Zone 1, VO
Manual Zone 2
-, 0..99 0
config:M/S w HG Configuration error: Simultaneous setting of
parameters for master-slave and discharge gas
defrosting -, 0..99 2
Check OD Alarm due to implausible opening degree (see
chapter
Implausible opening position alarm )
-, 0..99 0
Extern.Alarm Alarm for registering external alarms, default text is
“CO2-Alarm”
-, 0..99 0
Menu 6-6 Em.Powersupply (Emergency Power supply)
EM.POW.SUP POS: XXXXX Entry Default
Cool.funct.OFF xxx Functionality of the cooling switched off during
emergency power supply? (Y/N) ↑, ↓ (Y/N) N
Defr.funct.OFF xxx Functionality of the defrosting switched off during
emergency power supply? (Y/N) ↑, ↓ (Y/N) N
Fan funct. OFF xxx Functionality of the fan switched off during
emergency power supply? (Y/N) ↑, ↓ (Y/N) N
Frame fct.OFF xxx Functionality of the frame heater off during
emergency power supply? (Y/N) ↑, ↓ (Y/N) N
Light fct. OFF xxx Functionality of the light during emergency power
supply? (Y/N) ↑, ↓ (Y/N)