ECKELMANN Case Controller UA 4 E Series, Operating Instruction

Page: 263 / 466

Firmware V3.13 21.04.2021 263/466
•
•
•
Menu 6-3 Cooling
COOLING POS: XXXXX Entry Default
corr.off to XX K Correction offset for pressure loss in suction line
IMPORTANT : in stand alone operation must be set to
”--”!
--, 0..20 2 K
Cont Cool Mon. XX m Continuous run monitoring --, 0..15 0 min
HG operation XXX Discharge gas mode
↑, ↓,
(ON/OFF)
OFF
Ret Air Sensor → Operation with four return air sensors → or
↵
Menu 6-3-a
EnablingRel XXX Switching to “Enable Operation“:
OFF Opening degree is transmitted via the solid state
relay (SSR)
ON The two SSRs are no longer clocking, they are
switched on if the case controller requires
refrigeration, i.e. switched off again if no refrigeration
is required.
↑, ↓,
(ON/OFF)
OFF
Menu 6-3-a return air sensor
RET AIR SENSOR POS: XXXXX Entry Default
Temp. R4.3
R4.3 instead R5.1
↑, ↓,
(ON/OFF)
OFF
Temp. R4.4
R4.4 instead R5.2
↑, ↓,
(ON/OFF)
OFF
Weighting R4.3
Weighting between R4.1 and R4.3
0..100
0 %
Weighting R4.4
Weighting between R4.2 and R4.4
0..100
0 %
Menu 6-4 Language
Selection is made according to entry. Checkmark shows current setting.
LANGUAGE POS: XXXXX Entry Default
Deutsch D √ √
English GB
Francais F
Espanyol ESP
Finnish FIN
Cesky CZ