ECG MG 2510 Power, Instruction Manual, Page: 12 / 120

English English
12
MAINTENANCE AND CLEANING
Clean immediately after each use.
Always wait for all parts to come to a complete stop before
disassembling. The appliance needs approximately 60
minutes to cool down for safe handling and cleaning.
You can roughly clean the meat caught in the grinder by
grinding a dinner roll or a slice of bread.
Take extra care
when cleaning, the blades and graters are very sharp.
1. Before cleaning the product further turn it off and
unplug it.
2. Unscrew the locking ring and remove all the parts of
the machine (Fig.12).
3. Press the lock button, turn the machine in the direction
of the arrow and disconnect it from the body of the
grinder. Take out the pusher and the meat bowl. (Fig.
13)
4. Wash the appliance and all accessories (pusher, meat
bowl, conveyor screw, blades, hole plates, separators
and attachments as well as locking ring) in hot water with detergent.
5. Rinse with clean hot water and dry immediately.
6. We recommend coating the inside of the grinder and hole plates with edible oil.
Note: Do not wash any parts or accessories of this appliance in the dishwasher.
After it was used, wipe the body of the appliance with wet cloth and then dry thoroughly with dry cloth.
Protect the appliance from water and high humidity! Do not immerse it in water.
• Do not use thinner, gasoline or other aggressive or abrasive cleaners.
• Protect from direct sunlight and wet environment.
TECHNICAL SPECIFICATIONS
Nominal voltage: 220–240 V ~ 50-60 Hz
Nominal input power: 500 W
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product. Recycling contributes to
preserving natural resources. For more information on the recycling of this product, refer to your local authority,
domestic waste processing organization or store, where you purchased the product.
This product complies with the requirements of the EU directives on electromagnetic compatibility
and electrical safety and the issue of heavy metals in electrical and electronic equipment.
Furthermore, it meets the relevant energy intensity and hygienic requirements for direct contact
with food.
The operating manual is available on internet at www.ecg-electro.eu.
Changes of text and technical parameters reserved.
08/05
12
13