![background image](http://html.mh-extra.com/html/ecg/mg-2510-power/mg-2510-power_instruction-manual_531180009.webp)
English
English
9
OPERATING INSTRUCTIONS
Before first use
•
Carefully unpack the appliance and remove all packing material and advertising stickers.
•
Clean the machine and accessories, see chapter "Cleaning and maintenance".
•
Clean the grinder body with a damp cloth or sponge.
Warning:
Never soak or immerse the body of the grinder or the power cord in liquids.
Note:
When assembling the grinder or changing accessories, switch off the appliance and unplug it.
Assembly
•
Press the safety button and insert the machine into
the flange (make sure that it is turned at an angle, see
Fig. 1). Tighten the machine in the body of the grinder,
turning it to the left, see Fig. 2.
•
Insert the screw conveyor in the machine with the
longer shaft so that it fits into the body of the grinder
(Fig. 3).
•
Insert the rotary blade on the tip of the screw with the
blades (flat, sharp edge) forward as shown (Fig. 4). If you
insert it incorrectly, it will not grind the meat.
•
Now insert a hole of selected coarseness in the machine
. Make sure that it fits into the tabs on the machine
(Fig.5).
•
Hold the hole plate by the center and secure it in the
machine with the locking ring (Fig. 6). Tighten the ring
clockwise, do not overtighten it.
•
Place the meat bowl on the funnel of the machine and
fasten it.
•
Place the grinder on a suitable level surface.
•
Leave about 10 cm free space on the sides of the
grinder for air access.
Control of the grinder
Turn the unit on and switch the
b/B
knob to the "on"
position
b
, then switch the ON/0/R knob to the ON
position. After using the grinder, switch the
b/B
knob to
the "off" position
B
and then the ON/0/R neutral knob to position 0.
Summary of Contents for MG 2510 Power
Page 119: ......