Serial Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
72
XML Object Tables
This section includes tables that define ePDU CLI objects (Table 8) and System CLI Objects (Table 9 on
page 84).
Table 8. ePDU CLI Objects
XML Object Name
Type
Description
Unit
Access
Environment.ChangedStatus.CommunicationLost
Timestamp
Timestamp of last changing state of the alarm that has the
same name in the collection PresentStatus.
s
RO
Environment.ChangedStatus.OverHumidity
Timestamp
Timestamp of last changing state of the alarm that has the
same name in the collection PresentStatus.
s
RO
Environment.ChangedStatus.OverTemperature
Timestamp
Timestamp of last changing state of the alarm that has the
same name in the collection PresentStatus.
s
RO
Environment.Humidity
Measure
Measured Humidity on environmental monitoring probe.
0 when no probe is connected or when the probe does not
have a humidity sensor.
d%
RO
Environment.Input[1].ChangedStatus.Alarm
Timestamp
Timestamp of last changing state of the alarm that has the
same name in the collection PresentStatus.
s
RO
Environment.Input[1].iName
String[31]
Contact 1 friendly name
-
RW
Environment.Input[1].PresentStatus.Alarm
AlarmL1
Dry Contact alarm. Set according to the dry contact State
and the parameter State[0] or [1].Level
0: Alarm not active
1: Alarm active
Ex: State=0 AND State[0].Level=3 then Alarm=1
-
RO
Environment.Input[1].PresentStatus.State
Measure
Dry Contact state
0: Open
1: Close
-
RO
Environment.Input[1].State[0].Level
Parameter
Dry contact Config
1: Open makes just informational 0 into State.
2: Open makes Warning trap
3: Open makes Alarm trap
-
RW
Environment.Input[1].State[1].Level
Parameter
Dry contact Config
1: Close makes just informational 0 into State.
2: Close makes Warning trap
3: Close makes Alarm trap
-
RW
Environment.Input[2].ChangedStatus.Alarm
Timestamp
Timestamp of last changing state of the alarm that has the
same name in the collection PresentStatus.
s
RO
Environment.Input[2].iName
String[31]
Contact 2 friendly name
-
RW
Environment.Input[2].PresentStatus.Alarm
AlarmL1
Dry Contact alarm. Set according to the dry contact State
and the parameter State[0] or [1].Level
0: Alarm not active
1: Alarm active
Ex: State=0 AND State[0].Level=3 then Alarm=1
-
RO
Environment.Input[2].PresentStatus.State
Measure
Dry Contact state
0: Open
1: Close
-
RO