Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
123
3.
In the Authentication Mode panel, select a value from the External Authentication drop-down list:
l
None:
This disables external authentication. The Preference Order field is automatically checked to the
Local First, then External
value.
l
Radius:
This enables RADIUS. If LDAP or RADIUS are enabled, you must set a preference order in the
Preference Order drop-down list:
- External First, then Local
- Local First, then External
- External only
l
LDAP:
This enables LDAP. If enabled, you must set a preference order in the Preference Order
drop-down list:
- External First, then Local
- Local First, then External
- External only
4.
Click
Save
.
5.
Open the System submenu in the Settings menu. In the Network Management Card panel, click
Restart
network management card
to restart the eNMC module.
Set LDAP Search Configuration
NOTE
Each selection combination requires a different set of entries. Only applicable fields
are active. Fields that do not apply to your selection are inactive.
l
Active fields are white and the inactive fields are blue shaded.
l
When you click your cursor in inactive fields, nothing happens.
l
You can type in active fields.
1.
Access the Web interface and log in.
2.
Under Network and Security, select LDAP. The LDAP page displays.